• High performance in a compact design
  • The HFU200 allows rotational frequencies up to 1000Hz / 60.000Upm
  • A digital signal processor (DSP) is detecting all the operating parameters in real time and controls it in dependence on the load through a vector control function
  • Allows highest efficiency of the engines at low and high frequencies
  • High reliability: All operating conditions such as acceleration, operation at rated speed, and deceleration are monitored and critical states are absorbed
  • Controlled braking of the motor / spindle even with emergency stop
  • Integrated braking resistor
  • Transparency: The user is always informed about the current status of the converter and the spindle via LEDs on the front panel. Speed ​​with 3-digit LED display with load and LED bar
  • Control: The converter can be controlled manually by two front keys as needed
  • Individual adaptation to the respective application and attached spindle by freely programmable characteristic spindle curves. 16 Spindle characteristics can be created and stored
  • Diverse control and communication options
  • Simple and flexible integration into existing systems through open configuration of I / O signals for control and configuration
  • Galvanic isolationof all interfaces among each other and from net and motor potential
  • Short-circuit proof
  • Different housing variants are possible

Technical Data

Connectivity: 115 V/230, 50 Hz,1 PH
Power: 250 VA
Output voltage: 36 V
Output current: electronically limited
Overload: Duration adjustable max. 10s
Output frequency: 1.000 Hz / 60.000 Upm
Spindle curves:
max. 16, stored internally
Control inputs:
1 Analog: 0-10V, galvanically isolated
Control inputs:
1 Digital: 0-24V, galvanically isolated
Control outputs:
1 Analog: 0-10V, galvanically isolated
Control outputs:
5 Digital: over relay: 24VDC/250mA
Interface: RS232, 9600Bd
Housing: Cabinet- or desktop housing
Weight: ca. 6 kg
Protection: IP20
Operating temperature: 40°C
Order number: 33200(SSE)

Technical Drawing Desktop Housing


Technical Drawing Cabinet Housing


Comments are closed.